(Made in Turkey)](/web/image/product.product/46559/image_1024/%5BS432%5D%20Tie%20Rod%20End%20Renault%20Duster%20Left%20%5BRod%20Runner%5D(TR-DC-331%20)(Made%20in%20Turkey)?unique=ac21e48)
Tie Rod End Renault Duster Left [Rod Runner](TR-DC-331 )(Made in Turkey)
ALL-TERRAIN PRECISION: Rod RUNNER Tie Rod End (Left) TR-DC-331 – Turkish Durability for Renault Duster.
RESTORE TIGHT STEERING. END CLUNKING ON ROUGH ROADS. INSTALL THE OE-SPEC LINK BUILT FOR YOUR DUSTER SUV.
Your Renault Duster (and its Dacia platform counterpart) is designed for tough, multi-terrain performance, relying on a robust steering system to handle Egyptian highways and challenging off-road conditions.1 A worn Tie Rod End creates dangerous steering play, noticeable knocking over bumps, and rapid, premature tire wear.2
The Rod RUNNER Tie Rod End (Left Side / Part No: TR-DC-331) is the essential, heavy-duty component required to restore your Duster’s responsive and safe steering geometry.3 Manufactured in Turkey by Rod RUNNER, a specialist in chassis components for European vehicles, this link guarantees the durability, superior ball-joint construction, and precise length necessary for the Duster’s demanding suspension setup.4
THE CORE SPECS: Robust Linkage for Renault-Nissan B0 Platform
This Tie Rod End is designed for the Left (Driver's) side, connecting the inner tie rod to the steering knuckle.5 It is a critical component for safe wheel alignment.
| Specification | Detail | Direct Benefit to the Egyptian Driver |
| Rod RUNNER Part No. | TR-DC-331 | Exact Replacement. Use this code to confirm the specific link required for the Renault Duster (likely Gen 1, 2010–2018 models). |
| OE Part No. (Reference) | 8201108339 / 8201108332 Equivalent | Guaranteed Match. Corresponds to the required factory specification for the Duster’s front axle steering. |
| Fitting Position | Front Axle, Left (L) Side, Outer | Targeted Fitment. Ensures correct integration with the inner tie rod and steering knuckle. Always inspect the right side (often TR-DC-332) as well. |
| Construction | Heavy-Duty Steel / Reinforced Ball Joints | Impact Resilience. Built to withstand high vertical and lateral stresses, vital for an SUV used on unpaved or damaged roads. |
| Durability | Superior Ball-Joint Sealing | Contaminant Defense. High-quality rubber boot protects the internal joint from dust, sand, and water contamination, prolonging service life. |
| Origin | Made in Turkey (Rod RUNNER) | European Aftermarket Quality. Sourced from a major Turkish manufacturer specializing in durable chassis parts for Renault/Dacia. |
WHY ROD RUNNER TR-DC-331 IS YOUR MUST-BUY NOW
You are focused on safety, vehicle control, and preventing the rapid tire wear common with faulty steering components.
Eliminate Steering Play and Knocking: A worn outer tie rod end is a direct cause of play in the steering wheel and the distracting metallic knocking over bumps.6 The TR-DC-331 restores tight, precise steering feel.
Essential for Wheel Alignment: You cannot maintain stable wheel alignment (ضبط زوايا) with a failed tie rod end. Replacing this link is mandatory for correctly setting the toe angle, which saves your valuable Duster tires from premature wear.
Built for Duster's Environment: The Turkish manufacturing standard is optimized for the challenging road conditions and thermal cycles prevalent in the MENA region, ensuring this part is more resilient than standard components.7
Cost-Effective Safety: Rod RUNNER provides verified OE-level performance and precision at a competitive aftermarket price, making safety-critical suspension repairs affordable.8
RESTORE DUSTER'S ALL-TERRAIN CONTROL.
Don't drive an SUV with compromised steering. Address the clunking immediately.
Crucial Check: Verify your Renault Duster requires the Left Front tie rod end compatible with the TR-DC-331 part number (OE Ref: 8201108339).
Click "ADD TO CART" now and secure the Rod RUNNER TR-DC-331 Tie Rod End—the essential Turkish-made component for responsive and safe steering.
| Compatible Vehicles: Renault |
| Brand: ROD RUNNER |