Bardahl XCL G13 30C 5 Liter (Red Coolant) (Made in EU) // XCL G13 30C 5 Liter
VAG OEM STANDARD: BARDAHL XCL G13 Coolant (5 Liters) – German/EU Lobrid Technology.
MANDATORY FOR VW/AUDI/SKODA. GUARANTEE ANTI-BOIL PROTECTION. INSTALL THE SILICATE-FORTIFIED FLUID YOUR MODERN ENGINE NEEDS.
The Red/Violet G13 specification is the current mandatory coolant standard for the Volkswagen Audi Group (VAG), covering most vehicles manufactured from 2008 onwards (VW Golf, Audi A3/A4, Skoda Octavia, etc.). This coolant uses Lobrid technology (Hybrid OAT + Silicates), which provides the long-life corrosion protection of OAT while using silicates for fast-acting defense of aluminum components.
The BARDAHL XCL G13 Coolant (5 Liters) is the professional-grade, ready-to-use solution that directly meets the VW TL-774 J (G13) specification.1 Manufactured in the EU (Europe), this premium coolant ensures superior thermal stability and long-life corrosion defense, essential for surviving Egypt's high-heat, high-stress driving conditions.2
THE CORE SPECS: Pre-Mixed Lobrid (Si-OAT) for VAG Engines
This product is an essential, high-volume fluid for a complete cooling system service, ensuring maximum engine protection in high-performance aluminum engines.
| Specification | Detail | Direct Benefit to the Egyptian Driver |
| Coolant Standard | VW TL-774 J (G13) | OE Match. Mandatory for most post-2008 VW/Audi/Skoda vehicles. |
| Chemical Tech | Lobrid (Si-OAT) Technology | Dual Protection. Combines long-life OAT corrosion inhibitors with fast-acting silicates, crucial for high-efficiency aluminum components. |
| Concentration | 50/50 Premix (Ready-to-Use) | Convenience & Safety. Ethylene Glycol blended 50/50 with purified water, guaranteeing optimal concentration without mixing errors. |
| Boiling Point | High Anti-Boil Protection (Up to ~129°C+ in a sealed system) | Maximum Heat Defense. Guarantees boil-over protection, the single most critical factor for engine survival in the local climate. |
| Volume | 5 Liters (5lt) | Bulk Service. Ample volume for a full cooling system flush and fill on most passenger cars. |
| Origin | Made in EU (BARDAHL) | Premium Quality. Assures high-quality base fluids and corrosion inhibitor packages backed by European manufacturing. |
WHY BARDAHL XCL G13 IS YOUR MUST-BUY NOW
You are investing in the exact fluid specified by VAG to protect your modern engine, ensuring safety and avoiding costly coolant incompatibility issues.
Mandatory VAG Compliance: Using the wrong coolant type (e.g., green IAT or incorrect OAT) in G13-spec engines can lead to corrosion, water pump failure, and silicate drop-out. This BARDAHL G13 eliminates that risk.
Superior High-Heat Stability: The 50/50 glycol mix provides the highest possible anti-boil protection needed for turbocharged VAG engines under severe summer thermal load.
Prevents Aluminum Corrosion: The Lobrid technology provides active and long-term protection against the corrosion and cavitation (pitting) that damages aluminum cylinder heads and water pump impellers.
Extended Service Interval: G13 coolants are designed for long life, often lasting 5 years/250,000 km. This reduces your maintenance frequency and provides the best value over time.
SERVICE YOUR VAG ENGINE CORRECTLY.
Do not compromise on G13 fluid. Cooling system failure is a guarantee of expensive engine damage.
Crucial Warning: Always confirm your vehicle's manual specifies a Red/Violet/Pink G13 (VW TL-774 J) coolant. NEVER mix this with non-VAG coolants.
Click "ADD TO CART" now and secure the BARDAHL XCL G13 Coolant (5 Liters)—the essential German/EU-made component for maximum engine protection.
For more info about Abro Super Seal and its effect in reducing coolant loss, Please visit our Blog: Abro Super Seal
| Brand: Bardahl |
Ensure peak engine performance and longevity with Bardahl XCL G13 -30°C Red Coolant (5 Liter). Engineered in the EU to meet stringent G13 standards, this advanced anti-freeze and anti-corrosion fluid provides superior protection for your vehicle's cooling system. Its specialized formula prevents freezing down to -30°C and guards against overheating, rust, and scale build-up, ensuring your engine runs efficiently in all conditions. Ideal for modern vehicles requiring a G13 specification coolant, Bardahl XCL G13 extends the life of critical engine components and maintains optimal operating temperatures.
Trust Bardahl, a name synonymous with automotive excellence, for ultimate engine care. Available in a convenient 5-liter bottle, it's perfect for a complete system refill or top-up.
**Key Benefits:**
* **Ultimate Engine Protection:** Shields against freezing, boiling, and corrosion.
* **G13 Standard Compliance:** Meets specifications for many modern car manufacturers.
* **European Quality:** Expertly formulated and produced in the EU for reliability.
* **Long-Life Formula:** Reduces maintenance frequency and enhances component lifespan.
* **Optimal Thermal Control:** Maintains stable engine temperatures for peak performance.
Keep your engine safe and running smoothly – choose Bardahl XCL G13 today!